Discover the allure of modern opulence with the Concorde collection, where sleek designs and luxurious materials evoke a sense of opulence. Optimize space and aesthetics with our back-to-wall toilets, offering a clean and polished look with seamless integration. Offered in white with a glossy finish.
The Concorde Back-to-Wall Toilet Bowl possesses clean lines and fluid curves. Elegance is added to any bathroom given its graceful design, while the elongated bowl offers improved comfort. The Carrier Tank (not included) is completely concealed, helping to increase space while still offering simple and easy access to the plumbing system through the actuator plate (not included).
What's Included
- Back-to-Wall Toilet
- QQ Feet
- Quick-Release Seat
- Outlet Pipe
- Floor Anchor Kit
Parts
- Back-to-Wall Toilet: SM-WT514
- QQ Feet: SM-QQF16
- Quick-Release Seat: SM-QRS15
- Outlet Pipe: SM-CPT42
- Floor Anchor Kit: SM-TPT29
Required Components
- Wall Actuator: SM-WC001, SM-WC002, SM-WC003
- In-Wall Tank Carrier System: SM-WC324, SM-WC326
- Supply Line
Not Included
- In-Wall Carrier Tank
- Flush Actuator Plate
- Supply Line
Features
- Square bowl offers a wide seating area
- Space saving, back-to-wall design
- Durable Ceramic Material
- Slymm Soft-Close, Quick-Release Toilet Seat
- Pairs seamlessly with the SM-WC324 or SM-WC326 tank, sold separately
- Pairs with the SM-BD229 Bidet
Product Highlights
| Saves Space with Concealed Tank (sold separately) |
| Soft-Close Seat
|
| Sleek, Seamless Design |
| Secure Hold |
| Glazed Trapway |
Specifications
| Installation Type | Floor Mounted
|
| Material | Ceramic |
| Color & Finishes | White
|
| Overall Dimension | L: 22.06 x W: 13.75 x H: 15.94 |
| Weight | 70 lb. |
| Bowl Shape | SquareBowl |
| Rough-In Size | 7" |
| ADA Compliant | No |
Dimensions
Warranty
One-Year Limited Warranty
Swiss Madison products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products. Should there be any defects in materials or craftsmanship under regular use that are discovered within the first year of installation, Swiss Madison will provide replacement parts at no charge, or at its discretion, replace any product or part of the product that is deemed defective, under normal installation, use, service or maintenance. This warranty applies only to the original purchaser. Proof of purchase will be required in the instance of a claim.
Swiss Madison recommends all installations of Swiss Madison products to be conducted by a licensed, professional plumber or contractor. Swiss Madison will not be held responsible for any damage or product failure due to improper installation, misuse, or failure to utilize a licensed professional for installation. Swiss Madison is not responsible for any installation or removal costs.
This One Year Limited Warranty Will Be Voided If:
- The installation recommendations were not followed by the installer
- The product has been moved from its initial place of installation
- The product has in any way been modified from its packaged state
- The product has been subjected to improper maintenance, abuse, misuse, excessive use of chemicals, accidents, or other damages, etc.
Swiss Madison makes no implication that its products comply with any local building or plumbing codes. It is the consumers responsibility and obligation to determine local code compliance prior to and during installation. This warranty extends only to the original purchaser and first consumer.
Swiss Madison is not responsible for any special, incidental, or consequential damages associated with the installation, replacement, return or use of the original purchasers product. This includes, but is not limited to: freight costs, labor, travel time, lost profit, home damages, and other contingent liabilities and costs (including, without limitation, costs associated with professionals or experts, investigations, audits, analyses, attorneys and any other professional/hired services).
The Swiss Madison warranty is a comprehensive and explicit limit of liability. All items not disclosed within the warranty are not addressable within the responsibility of Swiss Madison. Certain states have variances regarding implied warranties; in those situations, we remain fully compliant.
Documents & Files
- Installation Manual
- Specification Sheet
- Swiss Madison Kitchen and Bath Catalog
Frequently Asked Questions
My flush is poor/not strong enough, what do I do?- Please turn your water off and empty the tank before starting. This makes it easier to reach the parts needed.
- Remove the flush valve. If you twist the unit slightly and lift up the whole piece should pop right out.
- Before adjusting any dials, turn the unit over and check the seal on the very bottom. Make sure it is not damaged in any way.
- There is a small ledge you can fit your thumb on near the long, blue, plastic piece that looks like a ruler. Push this piece down all the way down until you see the number The piece should click in.
- To the left of that ruler piece, there is a small switch the size of your thumb. Make sure this is pushed all the way up. The arrow should be pointing at the 10.
- You can then replace the flush valve, turn your water on and give a few test flushes.
These settings are the settings for maximum flush power. *For all models except SM-1T803. |
| The water level in my bowl is very low, is there a way to adjust this? In general, our toilets have a low water spot. If you wish to increase the water level inside of your bowl, there are small adjustments you can make. Next to your flush valve inside of the toilet tank, there is a small cylinder. On the top of this tube is a small dial. You can set the dial to 8 and this will slightly increase the water level in your bowl. Please note that it may take time for the changes to appear. |
| I need to make adjustments to my fill valve, how do I do this? Please be sure to have your water off and tank empty before you make these adjustments The float on your fill valve can be adjusted by twisting the little screw on the end of the arm, above the float. If that is insufficient, you can make larger adjustments by reaching on the side of the fill valve and flipping the switch (it is about the size of your thumb). This will unlock the fill valve and you should be able to slide the unit up or down to fit your needs. This is the first step. Please let us know if this does not work for you It may be hard to flip at first. But, this will allow you to make larger adjustments with your fill valve. If this does not work, you may need to check the seal on your flush valve.. |
| My seat appears too short/long for my toilet, what do I do? This is a simple fix, the following is our guide to making adjustments. - Disassemble
Disassemble the cover cap and the hinge. - Construct Hinges
Insert screw and nut into the hole on the hinge.
Attach blind hole screw fixing to the bottom of the screw - Attach Hinges
Insert hinges with blind hole screw fixings attached
into holes in the toilet bowl.
Lightly tighten hinges with a screwdriver to allow
for later adjustment - Adjust and Cover Hinges
Be sure the hinge is all the way forward for a proper
seat fitting.
Place the covers onto the hinges - Adjust and Attach the Seat
Align the seat to the hinges then firmly tighten the hinges.
Attach the seat to the secure hinges.
Adjust the seat to align with the bowl.
Toilet Seat Usage - To remove, push the middle button until you hear a click, then pull straight up
- To re-install, align hinge posts with reference marks on the seat, then push down until you hear a click.
|
| What is the weight limit for your toilets? When properly installed, our one-piece toilets can support up to 1,000 pounds. |
| What is the waterline connection size? Our one-piece toilets use a standard 0.88" waterline. We generally recommend the braided chrome style lines. |
| Are your toilets ADA compliant? ADA compliance is dependant on the toilet model. Please see product details on the individual product page for certification information. |
